Identification and quantification of anthocyanins in different coloured cultivars of ornamental kale (Brassica oleracea L. var. acephala DC)

Anthocyanins are responsible for the colour of many fruits, vegetables, flowers, and coloured-leaved trees. Ornamental kale (Brassica oleracea L. var. acephala DC) is widely cultivated for its colourful inner leaves. To investigate the relationship between the degree of colouration and anthocyanin distribution, content, and composition in ornamental kale, the authors studied the pigment characteristics of five cultivars with different coloured leaves (white, pink, red, purple, and purple-black). Microscopy observation, spectrophotometer, and high-performance liquid chromatography-mass spectrometry (HPLC-MS) analysis of fresh inner leaves revealed that pink, red, and purple colourations were associated with high levels of anthocyanin, while purple-black was the result of the combination of anthocyanins and chlorophyll. In the coloured cultivars, anthocyanins were abundant mainly in the first and second cell layers below the epidermis in both the hypocotyls and inner leaves. No anthocyanin was found in the white-leaved phenotype cultivar. Anthocyanin content increased as leaf colour deepened from pink, red, to purple cultivars, which had little chlorophyll and carotenoid. The authors identified eight anthocyanins in the four coloured cultivars, including one non-acylated, four monoacylated, and three diacylated cyanidin glycosides. Cyanidin-3-(sinapoyl)(feruloyl)-diglucoside-5-glucoside was the most abundant anthocyanin in the four coloured cultivars followed by cyanidin-3-(sinapoyl)-diglucoside-5-glucoside. The analysis of anthocyanin accumulation characterisation provides important information on evaluating colouration patterns in coloured plants, and will be helpful for breeding desired leaf colours in ornamental kale.     

长江口凤鲚雌雄成体营养成分分析与比较

对长江口雌性和雄性成体凤鲚(Coilia mystus)整体的营养成分和品质进行了分析与评价。结果显示,雌、雄凤鲚整体水分、粗蛋白、粗脂肪和灰分的质量分数分别为78.36%±1.41%、76.70%±1.20%,14.25%±1.05%、15.18%±0.12%,4.61%±1.78%、4.84%±0.27%和2.22%±0.38%、2.97%±0.64%,雌、雄间均不具有显著性差异(P0.05)。雌、雄均含有18种组成蛋白质的氨基酸,总量分别为66.20%±5.78%和65.93%±6.35%(质量分数,干样),其中8种必需氨基酸(EAA)总量分别是25.07%±1.93%和23.95%±2.21%,两者间不具有显著性差异(P0.05),分别占氨基酸总量的37.90%和36.33%,雌、雄凤鲚的必需氨基酸组成比例均符合FAO/WHO的标准。色氨酸是雌、雄凤鲚整体的第一限制性氨基酸,蛋氨酸+胱氨酸是第二限制性氨基酸,雌、雄凤鲚整体的EAAI分别为70.73和66.99,4种鲜味氨基酸总量分别为25.99%±2.53%和26.02%±2.3%(质量分数,干样)。雌性凤鲚的饱和脂肪酸(SFA)含量显著低于雄性(P0.05),而多不饱和脂肪酸(PUFA)含量则显著高于雄性(P0.05),单不饱和脂肪酸(MUFA)两者无显著差异(P0.05)。雌性凤鲚脂肪酸中EPA与DHA质量分数分别为5.70%±0.24%和10.15%±1.31%,显著高于雄性凤鲚的1.05%±0.40%和1.06%±0.44%。结果表明,长江口雌、雄成体凤鲚整体的氨基酸较均衡,而雌性凤鲚的脂肪酸营养更为丰富,比雄性凤鲚具有更好的食用价值与保健作用。     

鱼类miRNAs研究新进展

正MicroRNAs(miRNAs)是一类内生性的、进化上高度保守的单链成熟非编码RNA,长度约21~25个核苷酸,广泛存在植物、动物及微生物中~[1-2],参与生物体的胚胎形成、个体生长发育、机体免疫、疾病防御以及繁殖和糖脂类代谢等生命过程~[3-8]。目前,基于生物信息学预测,miRNAs约占整个基因组的2%~3%~[9]。自Lee等~[10]利用定位克隆法从秀丽隐杆线虫(Caenorhabditis elegans)中克隆到     

福建茶园化肥减施增效技术研究思路

化肥减施增效是支撑茶业可持续发展的重要路径.本文分析了福建省重点产茶区茶园肥料施用现状及典型茶区茶园土壤主要障碍因子,综述了福建省茶园养分管理研究进展,提出福建茶园化肥减施增效技术的研究思路:基于茶树养分需求特性研究制定相应的茶园施肥限量基准,研制具有区域及茶类针对性、兼顾土壤改良与地力提升的茶树专用配方肥;优化集成高效新型肥料、有机肥替代及适时推进机械施肥,形成福建典型茶区茶园化肥减施增效的初步技术模式,并建立相应技术规程;通过示范培训与推广应用,从整体上降低福建茶园化肥用量.     

武夷岩茶种质资源遗传多样性与亲缘关系的SRAP分析

本研究利用SRAP-PCR反应体系,从88对SRAP引物组合中筛选出43对引物组合,对武夷岩茶主要的30份种质资源进行SRAP分析,共扩增出385条带,其中具有多态性的有236条带,占总数的61.30%,表明30份武夷岩茶种质呈现一定的遗传多样性。武夷岩茶种质资源间遗传距离变幅在0.31~0.98之间,平均为0.63,基于SRAP标记利用系统聚类法把武夷岩茶分为三大类,为武夷岩茶遗传研究、品种选育与资源保护提供参考。     

Impact of grassland contract policy on soil organic carbon losses from alpine grassland on the Qinghai–Tibetan Plateau

Carbon storage in the soils on the Qinghai–Tibetan Plateau plays a very important role in the global carbon budget. In the 1990s, a policy of contracting collective grasslands to smaller units was implemented, resulting in a change from the traditional collective grassland management to two new management patterns: a multi‐household management pattern (MMP: grassland shared by several households without enclosures) and a single‐household management pattern (SMP: grassland enclosed and used by only one household). In 2016, 50 MMP and 54 SMP winter pastures on the Qinghai–Tibetan Plateau were sampled to assess the differences in soil organic carbon (SOC) between the two management patterns. Results showed that average SOC was significantly greater under MMP than under SMP, with an estimated 0.41 Mg C/ha/yr lost due to SMP following the new grassland contract. Based on the government's grassland policy, four grassland utilization scenarios were developed for both summer and winter pastures. We found that if the grassland were managed under SMP, likely C losses ranged between 0.31 × 10⁷ and 6.15 × 10⁷ Mg C/yr across the Qinghai–Tibetan Plateau relative to MMP, which more closely resembles pre‐1990s grassland management. Previous estimates of C losses have only considered land use change (with cover change) and ignored the impacts driven by land management pattern changes (without cover change). The new data suggest that C losses from the Qinghai–Tibetan Plateau are greater than previously estimated, and therefore that the grassland contract policy should be reviewed and SMP households should be encouraged to reunite into the MMP. These findings have potential implications for land management strategies not only on the Qinghai–Tibetan Plateau but also other grazing regions globally where such practices may exist.     

新疆红花地方种种子含油率与主要农艺性状间的灰色关联分析

为了新疆红花地方种高油品种的选育和改良提供科学数据,本研究采用灰色关联分析法,在新疆农业科学院综合试验场对来自新疆的51份红花材料的种子含油率与主要农艺性状进行分析。结果表明,新疆红花地方种的种子含油率与12个主要农艺性状的关联顺序为单株果球数>株高>三级有效分枝数>顶果球着粒数>节间长度>皮壳率>千粒重>生育期>一级有效分枝数>二级有效分枝数>分枝总数>节间数,表明单株果球数、株高、三级有效分枝数是影响新疆红花地方种种子含油率的重要因素。因此,在新疆红花地方种培育高油品种时,应优先考虑单株果球数,株高和三级有效分枝数等指标。本研究结果为培育高油红花提供科学参考数据。     

植物体铅的亚细胞分布与化学形态特征测定方法改进

为了提高植物体铅的亚细胞分布和化学结合形态特征的测定精度,以铺地黍为研究对象,利用不同提取方法测定其根部铅的分布特征,对重金属提取过程中植物取材质量与提取液体积之间的比例关系进行量化研究,改进重金属提取流程方法。结果显示,在确定植物取材重量时,其研磨后的植物材料体积与提取液总体积之间的比例为1:5时,各化学结合态提取效果比较理想,铅的回收率高达97.69%。铺地黍根部铅亚细胞分布的F2组分电热板消解的最适消煮温度和时间为：在250℃下消煮0.5 h,之后在145℃下消煮2 h的提取效果最佳,其残渣态铅含量约为0 μg/g,整体回收率高达98.38%。改进后的方法提高了测定的精度,节省测定时间,为植物体其他重金属的亚细胞分布和化学结合态测定方法改进提供参考。     

日光温室新型装配式骨架节点设计与有限元分析

为实现日光温室骨架的装配化,把控安装质量,提高温室骨架受力性能,设计完成了日光温室新型装配式骨架及装配式节点,以期为装配式日光温室提供新的研究思路.利用ANSYS Workbench软件建模辅助分析,比选外套管和内插管2种装配方式,在逐级均布荷载作用下主管和套管所受应力、剪力及弯矩情况;用Workbench软件分析装配式骨架在最不利荷载作用下轴向应力、剪力、弯矩及变形情况.结果 表明:骨架在外套管的装配方式下,主管及套管自身所受的轴向应力和弯矩更小,安全性更高.用外套管装配的三段桁架在最不利荷载组合作用下,最大轴向应力17.35MPa,最大变形量为0.26 mm,套管最大轴向应力5.0 MPa,最大剪力2345.3 N,最大弯矩为41.3N·m.该日光温室新型装配式骨架及装配式节点安全、稳定、变形量小,可推广使用.     

汽车变速器齿轮修形仿真分析

汽车变速器的关键部件齿轮因其加工和装配质量的影响,工作时容易引起振动噪声大及承载能力降低等问题,而齿轮修形是解决这些问题的有效方法,且成本较低。针对某款汽车变速器,利用Romax对齿轮进行修形分析。结果表明,修形后减小了齿轮的传动误差和最大接触应力,齿面载荷分布更加合理。有效改善了齿轮的传动性能,增加了齿轮寿命。